Instructions

1. Ensure the piece of clothing is thoroughly wet. For optimal results, remove the clothing from the washer after the washing cycle.

2. Assemble the frame. The feet are optional; if you choose to add them, ensure the screws and winged nuts are securely tightened. If the frame shows any instability, use a screwdriver to tighten the bottom bolt while holding the winged nut in place to ensure the frame is secure.

3. Lay the frame on a flat surface and position your clothing inside the frame.

4. Begin fastening the clothing clips, starting with the four corner clips, followed by the two middle clips, and finally, the clips on the sides of Clothing Canopy.

5. Tighten the drawstrings until the clothing is taut.

6. Stand the frame up in a well-ventilated area. Adjust the drawstrings as needed and leave the clothing to dry.

7. Unclip the piece of clothing and shake it out.